$100–$200 Rebate*
on Ground Source Heat Pumps

January 1–December 31, 2010

Incentives:

Rebate:
$200/ton closed loop system 
$100/ton open loop system 
(A typical home requires a heat pump in the 4-5 ton range)

installer/dealer incentive:
$300 per installation closed loop system 
$150 per installation open loop system

Conditions:

• The heat pump must be installed in homes of Minnesota Power residential customers on or before Dec. 31, 2010.
• The heat pump must have a minimum Coefficient of Performance (COP) of 3.3 for closed loop and 3.6 for open loop systems. This means that every unit of energy yields more than three units of heat.
• The heat pump must be installed by a certified GSHP contractor.

How to Get Your Rebate:

• Verify with the installer or dealer the COP rating on the geothermal heat pump.
• After receiving an estimated cost based on house size and soil conditions, consult your builder and MP representative about meeting Triple E standards.
• Have your GSHP installed by a certified GSHP contractor.
• Once the ground source heat pump is installed, print off the rebate form, fill it out and mail to the address on the form.
  
• If you have any questions about the program or need assistance with the rebate form, contact Andrea Prunuske at 608-249-9322, ext. 303, or 1-800-677-8423 (option 2).
• You may also request a video and informational literature on the installation and operation of geothermal heat pumps.